EAL - Initial and Periodic Inspection, Testing & Condition Reporting Combined Course
Price: £1350.00 (Inc. VAT & Certification Fees)
Due to the requirements of the JIB, Training in Electrical has combined both initial and periodic condition reporting qualifications as a 5 day combined qualification course. These qualifications are brand new and have been endorsed by Summit Skills and have been verified by Ofqual. Studying both these qualifications are a direct alternative to the City & Guilds 2394/5 combined course and is generally delivered over 5 days.
These combined qualifications are assessed by two open book on line multiple choice assessments sat during the week of the course. This course has become a very popular replacement to the City & Guilds versions as they are fully recognised by NICEIC, NAPIT and the Joint Industry Board (JIB) and can be used as evidence for grading as an Approved Electrician (if required).
These qualifications will help you to develop your knowledge and practical skills required to professionally design and install and periodic inspect and test electrical installations.
This award is ideal for qualified electricians wishing to update their knowledge of electrical installation skills in initial/fundamental inspection and testing. This Level 3 award is crucial if you are a qualified electrician and have a great deal of technical skills and knowledge.
This course is designed to give you the understanding of the principles, practices and legislation for the initial and periodic verification of electrical installations.
Its content covers the skills and necessary background knowledge for the inspection, testing, commissioning and certification of electrical installations.
This electrical course includes both theory and more importantly hands on experience testing real life installations at one of our training centres. You will have the opportunity to use a variety of different testers supplied by our test instrument sponsors, Megger, Fluke and Dilog.
The course content covers the following areas:
- Introduction to Inspection, Testing & Condition Reporting
- Requirements for initial verification
- Requirements for Periodic Condition Reporting
- Guidance Note 3
- Pre work survey
- Safe use of test equipment
- Complying with BS7671 wiring regulations
- Safe isolation procedures
- Order of tests
- Continuity of protective conductors
- Insulation resistance tests
- Polarity tests
- Earth electrode tests
- Earth fault loop impedance tests
- RCD testing
- Condition Reporting/Periodic Inspection
- Recording and completion of test results
- Completion of Condition Reports
- Commissioning of electrical installations
- Practical Hands on skills
- Exam preparation
What course next?
Environmental Technology Awareness.
2357 NVQ Level 3 in Electrical Installation
2 Day Portable Appliance Testing
IET 17th Edition Wiring Regulations (BS:7671) 2008 (2015)
IET On-site Guide BS7671:2008 (2015)
Guidance Note 3: Inspection and Testing, 6th Edition
Practical Guide to Inspection & Testing (Optional)
Memorandum of the Electricity at Work Regulations 1989
Course notes will be supplied
This qualification is intended for electrical operative who have practical experience and knowledge of inspection & testing of electrical installations, who require to become certified. Candidates must also hold the 17th Edition Wiring Regulations qualification. It is not suitable for non-qualified electrician. Newly qualified electrical operatives or those with little or no inspection & testing experience should consider completing the City & Guilds 2392-10 inspection & testing qualification.
Location > Nottingham
Book yourself a place on this course
It couldn't be easier to book yourself onto this course. Just click the button below.
Book this course